How to read a garcinia cambogia extract specification, line by line
What we settle before a garcinia cambogia extract specification sheet goes out. Most garcinia cambogia enquiries arrive with a competitor sheet quoting a single HCA percentage, so the first thing we establish is the assay grade and the method behind it, because a sheet that reads hydroxycitric acid 50% measured by one method is not comparable with a 60% sheet measured by another. We then ask which application the powder is going into, since capsules, meal-replacement powders and beverages pull the carrier and the mesh in different directions, and we confirm whether the buyer wants the pure extract or maltodextrin as a carrier. We also ask our manufacturing partner for the most recent lot COA to send alongside the sheet: the sheet states limits, the COA states results, and on a marginal lot those are two different documents.
A garcinia cambogia extract specification is a short sheet, and buyers read it looking for one number — HCA — more than any other line. Most people find “HCA 50%” or “60%” and are not sure what to compare against the sheet next door. This article reads the specification in the order that matters: what the source, solvent and carrier lines tell you, what the assay and physical lines actually commit to, and what the batch COA adds on top. The commercial side — how quotations are compared and what a first order looks like — is covered in our garcinia cambogia extract sourcing guide.
What the source, solvent and carrier lines tell you
The botanical line reads Garcinia cambogia (Garcinia gummi-gutta) and the part-used line reads fruit rind — the rind is where hydroxycitric acid concentrates, which is why a sheet that states the part used honestly is easier to trust in this category. The extraction solvent line reads water / ethanol-water, a conventional food-grade system, and nothing on our sheet hides behind it. The carrier line is the one buyers overlook: our standard material is the pure extract with no carrier, and maltodextrin can be added on request where a formula needs improved flow or a standardised bulk density. That line changes the dosing math downstream, because a 60% HCA powder carried on maltodextrin delivers less HCA per gram than the same assay stated pure — so before comparing prices, ask whether a competitor percentage is stated on the pure extract or on a diluted powder.
The assay line: what HCA 50% / 60% (HPLC) commits to
The assay line states hydroxycitric acid (HCA) at 50% or 60%, measured by HPLC. That is the single most useful filter in the category, and the method is part of the commitment: HCA figures obtained by titration or by UV read differently from HPLC results on the same material, so the first question to any garcinia cambogia supplier is which method stands behind the number. On our sheet the figure is the standard production grade, and alternative assays can be produced to your specification — we confirm feasibility and lead time with our manufacturing partner before quoting rather than after.
The assay line is a commitment, not a result. The sheet states what the grade commits to; the batch COA states what the lot tested.
The physical lines: mesh, loss on drying and ash
Three physical lines decide whether the powder works in your process:
- Particle size. 80 mesh is the standard grade, with 100 mesh on request. For capsules and dry blends the standard mesh flows without a separate milling stage; 100 mesh suits processes that need a finer dispersion.
- Loss on drying. Limited to 5.0% or less. This is the free-moisture line, and it is the one that matters most for shelf life in unopened original packing.
- Total ash. Also limited to 5.0% or less. On a water / ethanol-water extract, ash is the inorganic residue after combustion, and the limit keeps the HCA content honest.
The appearance line — off-white to pale beige fine powder with characteristic odour and taste — is what you check against the sample rather than against the sheet.
Packing, shelf life and what the batch COA adds
| Line | Standard grade |
|---|---|
| Packing | 25 kg fibre drum, double polyethylene liner |
| Sample and pilot packing | 1 kg and 5 kg foil bags |
| Shelf life | 24 months in unopened original packing |
| Storage | Cool, dry, away from direct sunlight |
| MOQ | 1 kg |
Every lot ships with a batch COA and full documentation. The sheet states limits; the COA states results, and on a marginal lot those are two different documents — which is why we ask buyers to compare the lot COA that would ship with their order rather than a generic sample. When two garcinia cambogia specifications land side by side, the COA is the document that settles which sheet describes the material you would actually receive. One compliance note belongs in every garcinia conversation: we supply the extract as a raw ingredient for manufacturing, we make no efficacy claims for it, and how the finished product is labelled is the buyer’s responsibility.
How we read a garcinia cambogia extract specification against a quotation
When a buyer sends us a competitor sheet, we read four things in this order: the assay grade and method, the carrier line, the physical limits, and the documentation offered. Where the competitor sheet quotes a percentage without a method, we ask for the lot COA behind it. Where the carrier or mesh differs from our standard, we confirm feasibility and lead time with our manufacturing partner within one business day. And where the buyer needs OEM packing under their own brand, we treat that as drum and label work, not as a change to the powder. The applications the powder is bought for — weight-management capsules and tablets, meal-replacement powders, functional beverages and fitness nutrition stacks — are covered in our garcinia cambogia extract applications breakdown.
Frequently asked questions
What is garcinia cambogia extract standardised to?
The standard assay is hydroxycitric acid (HCA) at 50% or 60%, measured by HPLC, from the fruit rind of Garcinia cambogia (Garcinia gummi-gutta) extracted with water or ethanol-water. The powder is off-white to pale beige, fine, with characteristic odour and taste, supplied as the pure extract or on maltodextrin on request. Loss on drying and total ash are each limited to 5.0% or less, and the powder is 80 mesh as standard with 100 mesh on request.
What should I check when comparing garcinia cambogia extract specifications?
Check the assay grade and method first: HCA 50% or 60% stated explicitly with the method behind it (ours is HPLC), because figures obtained by titration or UV read differently from HPLC results and sheets written on different bases cannot be compared line by line. Then the carrier line (pure extract, or maltodextrin on request), the mesh line (80 mesh standard, 100 mesh on request), the physical limits (loss on drying and total ash each at 5.0% or less), and the documentation: ask each supplier for the lot COA that would ship with your order rather than a generic sample.
What packing and shelf life does garcinia cambogia extract come in?
Standard packing is a 25 kg fibre drum with a double polyethylene liner, with 1 kg and 5 kg foil bags for samples and pilot runs. Shelf life is 24 months in unopened original packing, stored cool, dry and away from direct sunlight. MOQ is 1 kg, and every lot ships with a batch COA.
Related reading
- This is where garcinia cambogia extract applications earn their place in a formula
- How to source garcinia cambogia extract without guessing the HCA grade
Related: Garcinia Cambogia Extract — full specification, grades and documentation. Formulators pairing garcinia with other weight-management actives also work with our White Kidney Bean Extract.